- American Company
24/7 Online store
American Company
Menu
WEG Motor W22 – 7.5HP, 230V – 1Ph, 60 Hz, 3510RPM, TEFC, Foot-mounted, Model 00736ES1E213TC-W22G
5/5
WEG Motor W22 – 7.5HP, 230V – 1Ph, 60 Hz, 3510RPM, TEFC, Foot-mounted, Model 00736ES1E213TC-W22G
Free Shipping
Additional information
| Brand | WEG |
|---|---|
| AC Voltage | 208-220 volts, 230 volts |
| Horsepower | 7.5 |
| Phase | Single Phase |
| Material | Aluminum |
| RPM | 3600 |
| Explosion Proof | No |
$1,238.99
High starting torque.
Suitable for domestic and rural power supply conditions.
Adaptable design suitable for a variety of applications and needs.
Product Features
| Standard | NEMA MG-1 |
|---|---|
| Frequency | 60 Hz |
| Voltage | 230V |
| Number of poles | 2 |
| Degree of Protection | IP55 |
| Synchronous speed | 3600 rpm |
| Output rating | 7.5 HP |
| Flange | C |
| Mounting | F-1 |
| Terminal box | Left position |
| Enclosure | IC411 – TEFC |
*If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply
Description
Technical Data
V-Ring Seal
V-Ring Seal to avoid the liquids and dust inlet in the motor.
Capacitor
With runner capacitor, runner and permanent capacitor or permanent capacitor.
Cooling System
• The cooling system (fan, non-drive end shield and fan cover) is designed to minimize noise level and improve thermal efficiency.
• Steel plate fan cover provides high mechanical strength, corrosion resistance and extended lifetime.
Aluminum Frame
• FC-200 (EN GJL 200) aluminum frames meeting impact level IK08 (5J) ensuring superior mechanical strength for the most demanding applications.
• Solid motor feet providing excellent rigidity, allowing easier alignment and installation.
Centrifugal Switch
The starting system of W22 single phase motors was completely redesigned to improve functionality, thus increasing system reliability and lifespan.
Technical Data
| Brand | WEG |
|---|---|
| Frame | 213/5TC |
| Output | 7.5 HP (5.5 kW) |
| Number of Poles | 2 |
| Frequency | 60 Hz |
| Rated Speed | 3510 rpm |
| Slip (%) | 2.50 |
| Rated Voltage (V) | 208-230 |
| Rated Current (A) | 30.5-28.2 |
| L. R. Amperes (A) | 220-203 |
| LRC (A) | 7.2x (Code G) |
| No load Current (A) | 5.69-6.60 |
| Rated Torque (ft.lb) | 3.00 |
| Locked Rotor Torque (%) | 280 |
| Breakdown Torque (%) | 290 |
| Locked Rotor Time | 12s (cold) 7s (hot) |
| Moment of Inertia (J) | 0.5550 sq.ft.lb |
| Insulation Class | F |
| Service Factor | 1.15 |
| Temperature Rise | 80 K |
| Duty Cycle | Cont. (S1) |
| Starting Method | Direct On Line |
| Ambient Temperature | -20°C to +40°C |
| Altitude | 1000 m.a.s.l. |
| Degree of Protection | IP55 |
| Enclosure | IC411 – TEFC |
| Mounting | F-1 |
| Rotation | Both (CW and CCW) |
| Noise Level | 72.0 dB(A) |
| Approx. Weight (lb) | 168 |
Efficiency
| 25% | 50% | 75% | 100% |
|---|---|---|---|
| 76.8 | 78.5 | 84.0 | 85.5 |
Power Factor
| 25% | 50% | 75% | 100% |
|---|---|---|---|
| 0.74 | 0.99 | 0.99 | 0.99 |
Features
| Frame Material | Aluminum |
|---|---|
| Impregnation Method | Dip and Bake Polyester |
| Main terminal box hole | NPT 1″ |
| Terminal Block | Without |
| Shaft Locking Device | Without |
| Drain | Rubber, automatic |
| Shaft Material | SAE 1040/45 Carbon Steel |
| Painting | RAL 5009 207N (ISO 12944 – C2) |
| Grounding Lugs | Single |
| Fan Cover material | Steel |
| Tropicalized Painting | Without |
| Bearing cap | Yes |
| Drip Cover | Without |
| Overload Protector (phenolic) | Without |
| Screw Cap | Carbon Steel SAE 1010/20 |
| Fan material | Plastic |
Dimensions
Additional information
| Brand | WEG |
|---|---|
| AC Voltage | 208-220 volts, 230 volts |
| Horsepower | 7.5 |
| Phase | Single Phase |
| Material | Aluminum |
| RPM | 3600 |
| Explosion Proof | No |
Related products
-
Free ShippingWEG Motor W22 – 5HP, 230/460V – 3Ph, 60 Hz, 1755RPM, TEFC, Foot-Mounted, Model 00518ET3E184T-W22
$598.99 Read more -
Free ShippingWEG Motor W22 – 7.5HP, 230V – 1Ph, 60 Hz, 1750RPM, TEFC, Foot-mounted, Model 00718ES1E215TC-W22
$1,093.99 Add to cart -
Free ShippingWEG Motor W22 – 3HP, 230V – 1Ph, 60 Hz, 1745RPM, TEFC, Foot-Mounted, Model 00318ES1C184T-W22
$678.99 Add to cart -
Free Shipping
WEG Motor W22 – 10HP, 230V – 1Ph, 60 Hz, 3515RPM, TEFC, Foot-Mounted, Model 01036ES1E215TC-W22
$1,527.99 Add to cart
PUMPDEPOT.US