• American Company
  • info@pumpdepot.us
  • American Company
  • info@pumpdepot.us
  • CALL US
  • +1 (786) 613-5872
  • EMAIL US
  • info@pumpdepot.com

WEG Motor W21 Explosion Proof NEMA Premium Efficiency – 5HP, 230/460V – 3Ph, 60Hz, 3490RPM, TEFC, Foot-mounted, Model: 00536XT3E184TC

5/5

WEG Motor W21 Explosion Proof NEMA Premium Efficiency – 5HP, 230/460V – 3Ph, 60Hz, 3490RPM, TEFC, Foot-mounted, Model: 00536XT3E184TC

SKU 5160604 Categories , , Tags , ,

Additional information

Brand

WEG

AC Voltage

230 volts, 460 volts

Horsepower

5

Phase

Three Phase

Material

Cast Iron

RPM

3600

Explosion Proof

Yes

$1,176.99

WEG Explosion proof motor was especially designed to operate in environments with the presence of explosive atmospheres. It has robust construction, a flame retention system with gaps between the parts carefully designed, accurate machining on the terminal box and screws with high mechanical strength. It meets the requirements of explosive atmospheres like Division I/Zone 1. Motors are certified for VFD service.

Product Features

Standard NEMA MG-1
Frequency 60 Hz
Voltage 230/460V
Number of poles 2
Degree of Protection IP55
Synchronous speed 3600 rpm
Output rating 5 HP
Flange C
Mounting F-1
Terminal box Left position
Enclosure IC411 – TEFC

  *If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply

Add to Cart

Description

Technical Data

V-Ring Seal

V-Ring Seal to avoid the liquids and dust inlet in the motor.

Capacitor

With runner capacitor, runner and permanent capacitor or permanent capacitor.

Cooling System

• The cooling system (fan, non-drive end shield and fan cover) is designed to minimize noise level and improve thermal efficiency.
• Steel plate fan cover provides high mechanical strength, corrosion resistance and extended lifetime.

Cast Iron Frame

• FC-200 (EN GJL 200) cast iron frames meeting impact level IK08 (5J) ensuring superior mechanical strength for the most demanding applications.
• Solid motor feet providing excellent rigidity, allowing easier alignment and installation.

Centrifugal Switch

The starting system of W21 three phase motors was completely redesigned to improve functionality, thus increasing system reliability and lifespan.

Technical Data

Brand WEG
Frame 182/4TC
Output 5 HP
Number of Poles 2
Frequency 60 Hz
Rated Speed 3490 rpm
Slip (%) 3.06
Rated Voltage (V) 230/460
Rated Current (A) 12.2/6.10
L. R. Amperes (A) 91.5/45.7
LRC (A) 7.5x (Code J)
No load Current (A) 4.40/2.20
Rated Torque (ft.lb) 7.52
Locked Rotor Torque (%) 250
Breakdown Torque (%) 380
Locked Rotor Time 46s (cold) 26s (hot)
Moment of Inertia (J) 0.1889 sq.ft.lb
Insulation Class F
Service Factor 1.15
Temperature Rise 80 K
Duty Cycle Cont. (S1)
Starting Method Direct On Line
Ambient Temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 – TEFC
Mounting F-1
Rotation Both (CW and CCW)
Noise Level 69.0 dB(A)
Approx. Weight (lb) 134

Efficiency

25% 50% 75% 100%
84.3 85.5 87.5 88.5

Power Factor

25% 50% 75% 100%
0.47 0.70 0.81 0.86

Features

Frame Material Cast Iron
Impregnation Method Dip and Bake Polyester
Main terminal box hole NPT 3/4″
Terminal Block Without
Shaft Locking Device Without
Shaft Material SAE 1040/45 Carbon Steel
Painting RAL 5009 202P (ISO 12944 – C4)
Grounding Lugs Single
Fan Cover material Steel
Tropicalized Painting Without
Bearing cap Yes
Drip Cover Without
Overload Protector (phenolic) Without
Screw Cap Stainless Steel AISI 316L
Fan material Plastic

Dimensions

Additional information

Brand

WEG

AC Voltage

230 volts, 460 volts

Horsepower

5

Phase

Three Phase

Material

Cast Iron

RPM

3600

Explosion Proof

Yes