• American Company
  • American Company
  • CALL US
  • +1 (786) 613-5872

WEG Rolled Steel Motor – 2HP, 230/460V – 3Ph, 60 Hz, 1745RPM, TEFC, Foot-mounted, Model 00218ET3E56C-S

5/5

WEG Rolled Steel Motor – 2HP, 230/460V – 3Ph, 60 Hz, 1745RPM, TEFC, Foot-mounted, Model 00218ET3E56C-S

SKU 5160701 Categories , , Tags , ,

Additional information

Brand

WEG

AC Voltage

230 volts, 460 volts

Horsepower

2

Phase

Three Phase

Material

Rolled Steel

RPM

1800

Explosion Proof

No

$392.99

Out of stock

The Rolled Steel motors line were developed for applications that demand performance, robustness and low weight integrated into a single product. The electrical and mechanical concept of the line make the motor present an optimum cost-benefit, providing reliability and energy savings.

Product Features

Standard NEMA MG-1
Frequency 60 Hz
Voltage 230/460
Number of poles 4
Synchronous speed 1800 rpm
Output rating 2 HP
Flange C
Mounting F-1
Terminal box Left position
Enclosure IC411 – TEFC

  *If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply

Add to Cart

Description

Technical Data

Technical Data

Brand WEG
Frame 56HC
Output 2 HP
Number of Poles 4
Frequency 60 Hz
Rated Speed 1745 rpm
Slip (%) 3.06
Rated Voltage (V) 230/460
Rated Current (A) 5.44/2.72
L. R. Amperes (A) 44.6/22.3
LRC 8.2x (Code K)
No load Current (A) 2.80/1.40
Rated Torque (ft.lb) 6.02
Locked Rotor Torque (%) 270
Breakdown Torque (%) 300
Locked Rotor Time 27s (cold) 15s (hot)
Moment of Inertia (J) 0.1296 sq.ft.lb
Insulation Class F
Service Factor 1.15
Temperature Rise 80 K
Duty Cycle Cont. (S1)
Starting Method Direct On Line
Ambient Temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Enclosure IC411 – TEFC
Mounting F-1
Rotation Both (CW and CCW)
Noise Level 52.0 dB(A)
Approx. Weight (lb) 42.7

Efficiency

25% 50% 75% 100%
86.0 85.5 87.5 86.5

Power Factor

25% 50% 75% 100%
0.35 0.60 0.73 0.80

Features

Frame Material Rolled Steel
Impregnation Method Dip and Bake Polyester
Main Terminal Box Hole 0.881″
Terminal Block Without
Shaft Material SAE 1040/45 Carbon Steel
Painting Munsell N 1 – Matte 207N (ISO 12944 – C2)
Grounding Lugs Single
Fan Cover Material Steel
Tropicalized Painting Without
Bearing Cap Yes
Drip Cover Without
Overload Protector (phenolic) Without
Screw Cap Carbon Steel SAE 1010/20
Fan Material Plastic

Dimensions

Additional information

Brand

WEG

AC Voltage

230 volts, 460 volts

Horsepower

2

Phase

Three Phase

Material

Rolled Steel

RPM

1800

Explosion Proof

No

PUMPDEPOT.US