American Company
| Brand | WEG |
|---|---|
| AC Voltage | 110-115 volts, 208-220 volts, 230 volts |
| Horsepower | 1.5 |
| Phase | Single Phase |
| Material | Rolled Steel |
| RPM | 1800 |
| Explosion Proof | No |
$405.99
The Rolled Steel motors line were developed for applications that demand performance, robustness and low weight integrated into a single product. The electrical and mechanical concept of the line make the motor present an optimum cost-benefit, providing reliability and energy savings.
| Standard | NEMA MG-1 |
|---|---|
| Frequency | 60 Hz |
| Voltage | 115/208-230 |
| Number of poles | 4 |
| Synchronous speed | 1800 rpm |
| Output rating | 1.5 HP |
| Flange | Without |
| Mounting | F-1 |
| Terminal box | Without |
| Enclosure | IC01 – ODP |
*If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply
Technical Data| Brand | WEG |
|---|---|
| Frame | 56H |
| Output | 1.5 HP |
| Number of Poles | 4 |
| Frequency | 60 Hz |
| Rated Speed | 1740 rpm |
| Slip (%) | 3.33 |
| Rated Voltage (V) | 115/208-230 |
| Rated Current (A) | 13.0/7.52-6.49 |
| L. R. Amperes (A) | 105/60.9-52.6 |
| LRC | 8.1x (Code K) |
| No load Current (A) | 4.90/2.11-2.45 |
| Rated Torque (ft.lb) | 4.53 |
| Locked Rotor Torque (%) | 320 |
| Breakdown Torque (%) | 229 |
| Locked Rotor Time | 39s (cold) 22s (hot) |
| Moment of Inertia (J) | 0.1362 sq.ft.lb |
| Insulation Class | F |
| Service Factor | 1.15 |
| Temperature Rise | 80 K |
| Duty Cycle | Cont. (S1) |
| Starting Method | Direct On Line |
| Ambient Temperature | -20°C to +40°C |
| Altitude | 1000 m.a.s.l. |
| Enclosure | IC01 – ODP |
| Mounting | F-1 |
| Rotation | Both (CW and CCW) |
| Noise Level | 52.0 dB(A) |
| Approx. Weight (lb) | 45.2 |
| 25% | 50% | 75% | 100% |
|---|---|---|---|
| 79.4 | 80.5 | 83.0 | 83.8 |
| 25% | 50% | 75% | 100% |
|---|---|---|---|
| 0.51 | 0.78 | 0.85 | 0.88 |
| Frame Material | Rolled Steel |
|---|---|
| Impregnation Method | Dip and Bake Polyester |
| Terminal Block | Without |
| Shaft Material | SAE 1040/45 Carbon Steel |
| Painting | Only primer |
| Grounding Lugs | Single |
| Fan Cover Material | Without |
| Tropicalized Painting | Without |
| Bearing Cap | No |
| Drip Cover | Without |
| Overload Protector (phenolic) | Without |
Copyright © 2025 pumpdepot.us All Rights Reserved
