SAER 6BP4/110 Centrifugal Water Pump - 9480 GPH - 1.5HP - 220V - 1PH

SAER 6BP4/110 Centrifugal Water Pump - 9480 GPH - 1.5HP - 220V - 1PH

Share on facebook
Share on twitter
Share on linkedin
  • High flow heavy duty centrifugal pump
  • 2″ NPT threaded suction and discharge
  • Cast iron body for rugged durability

Estimated Delivery: 3 – 5 Business Days


This SAER 6BP 4/110 centrifugal water pump is a heavy duty, threaded centrifugal pump and can be used in surface and overhead irrigation systems, for taking water from lakes, rivers, tanks, and many other industrial uses.

Made in Italy


  • NPT Threaded suction and discharge for a quick, easy connection
  • Closed impeller obtains best efficiency levels
  • Totally enclosed motor
  • Stainless steel shaft provides strength and resistance to corrosion
  • Greased pre-lubricated ball bearings
  • Cast iron body for rugged durability
  • Graphite/ceramic mechanical seal for wear resistance


The electric pump 6BP series can be used for surface flooding and spray irrigation systems, lifting water from lakes, rivers and tanks, and for various industrial applications.

Pump Construction

Pump body and motor support in cast iron. Wide range of available material for the impellers: cast iron. Mechanical seal in graphite/ceramic, totally enclosed motor with external ventilation, rotor mounted on maintenance-free ball bearings. The pumps can be supplied with a built-in thermal overload protection on request. The capacitor is permanently in circuit in the single-phase version.

Pump Performance Data

  • Temperature of pumped liquid: 5°F to 158°F
  • Maximum working pressure: 87 psi
  • Maximum ambient temperature: 104°F

The performance data shown is based on continuous service for clear water (specific weight 62.5 lb/ft³) with a maximum manometric suction lift of 5 feet w.c. For higher manometric lifts, up to a maximum of 16ft, pump capacities are reduced. The suction pipe must be perfectly airtight to ensure the performance date shown.


The series BP electric pumps can be installed with the motor shaft mounted either horizontally or vertically. In the event of vertical installations, the motor must always be positioned above the pump body.


  • Gas threaded Suction and discharge ( NPT on request) for a quick and easy connection
  • Grey cast iron pump body designed with suitable thickness to guarantee greater resistance and life to the working pressure
  • Closed impeller to obtain the best efficiency levels and reduce pump NPSHr.
  • Different configurations of mechanical seal according to chemical compatibility with pumped fluid
  • Stainless steel shaft with cross section increased to resist generated loads
  • Wide availability of electric motors with special voltage on request. High reliability for heavy duty in agriculture and industrial applications
  • Grease prelubricated ball bearings oversized and protected from outer agents to provide low noise operation without need for maintenance.

More Details

Manufacturer’s Warranty1 year Limited Warranty
Ship Weight44 lbs
Port Size (in.)2″
Flow (GPH)9480
Volts220V / 1 Phase
Max. Total Head (ft.)72′
Max. Suction Lift (ft.)17′
Max. PSI32psi
Suction Port (in.)2″
Discharge Port (in.)2″
Dimensions L x W x H (in.)12.4″ x 9.8″ x 7.1″
Product Weight (lbs.)42lbs

Downloadable Information

pdf iconUser Manual

pdf iconParts

pdf iconHydraulic Feature Table


Suction Port

Discharge Port







Cast Iron




There are no reviews yet.

Be the first to review “SAER 6BP4/110 Centrifugal Water Pump – 9480 GPH – 1.5HP – 220V – 1PH”

Your email address will not be published. Required fields are marked *