• American Company
  • info@pumpdepot.us
  • American Company
  • info@pumpdepot.us
  • CALL US
  • +1 (786) 613-5872
  • EMAIL US
  • info@pumpdepot.com

Speroni APM150(P30) Convertible Deep Well Jet Pump – 552 GPH – 1.5HP – 220V – 1PH

5/5

Speroni APM150(P30) Convertible Deep Well Jet Pump – 552 GPH – 1.5HP – 220V – 1PH

Weight14 lbs
Dimensions8.8 × 4.8 × 5.6 in
AC/DC Pumps

Horsepower

1.5

Phase

Self-Priming

Voltage

Brand

Speroni

Category AC Pumps

, ,

$839.99

The Speroni APM 150 is a convertible, deep well, self-priming, jet pump and is great for draining water from  wells. This pump is also suitable for use with domestic fittings with small to medium sized tanks.

  • Suction depth of up to 164ft
  • Great for draining wells
  • Cast iron pump body

Estimated Delivery Time: 3 – 5 Business Days

  *If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply

Applications

Self-priming water pumps for deep suctions up to 164ft to be used in case of important water level gaps. Suitable to drain water from wells and in domestic fittings by small and medium sized tanks. Before installing the pump verify that all pipes (iron, plastic or rubber) are clean inside so to avoid any obstruction to the ejector nozzle. At the foot of the ejector must be installed a foot valve or a check valve. Installed the pump, fill completely both pipes and pump body with clean water. To preserve an efficient priming it is necessary a certain pression in the circuit, therefore it is recommended to install a membrane tank at the delivery of the pump.

Features

The separate ejector pump is basically a centrifuge with a possibility of becoming a self-priming jet pump with deep suction by fitting the ejector in the well onto the end of the suction pipe. Recirculation of water passing through the Venturi attracts water from below and pushes it through the return (suction) pipe creating enough pressure to take it up to the surface. For these deep suction applications two pipes need to be connected: the delivery pipe to the ejector and the return (suction) outlet, in this case the diameter of the well must be at least 4″.

Operating Conditions

  • Liquid temperature up to 95°F (for home use according to EN 60335-2-41)
  • Temperature max. liquid: 95°F (for other uses)
  • Ambient temperature up to 104°F
  • Total suction lift up to 164ft.
  • Standard ejector P30

Motor

  • Two-Pole induction motor (n = 3450 min-1)
  • Insulation Class F
  • Protection IP 55

Materials

  • Pump body: Cast Iron
  • Motor support: Cast Iron
  • Impellers: Noryl
  • Diffuser: Noryl
  • Ejector: Cast Iron
  • Shaft with rotor: Stainless Steel AISI 304
  • Mechanical seal: Ceramic/Graphite/NBR

Technical Specifications

ModelAPM 150 (P30)
BrandSperoni
Manufacturer’s Warranty1 year Limited Warranty
Shipping Weight66.5lb
Port Size (in.)1″ & 1.25″
Maximum Flow (GPH)554 GPH
Maximum Head (ft)200ft
HP1.5HP
Volts220V
Suction Port (in.)1.25″
Discharge Port (in.)1″
Self-PrimingYes
Dimensions L x W x H (in.)19.7″ x 9.3″ x 10.8″
Product Weight (lbs.)61.5lbs

Dimensions

 

 

TypeDimensions (inches)Box DimensionsWeight
Single PhaseABCDEFHH1DNADNMPLHlb
APM 1504.1″3″16.3″8.7″6.8″0.4″9.5″4.5″1.25″1″9.3″19.7″10.861.5

Performance Table

TypeNominal
Power
Input
Power
AmperageCapacity
Single PhaseP2P1Single PhaseEjector TypeSuction DepthGPM0.81.62.645.36.67.99.2
220V 60HzHPKWKW1 x 220Vlt/1′36101520253035
APM 1501.51.11.57P3035H(ft)20018716714112047.6
40183.7170.6150.9124.7103.331.1
50150.9137.8118.191.921.570.5
Weight14 lbs
Dimensions8.8 × 4.8 × 5.6 in
AC/DC Pumps

Horsepower

1.5

Phase

Self-Priming

Voltage

Brand

Speroni

Category AC Pumps

, ,

PUMPDEPOT.US