• American Company
  • American Company
  • CALL US
  • +1 (786) 613-5872
PumpDepot-logo
pump depot logo white alternative
pump depot logo white alternative
pump depot logo white alternative

WEG Motor W40 – 40HP, 230/460V – 3Ph, 60 Hz, 1775RPM, ODP, Foot-mounted, Model 04018OT3E324T-W40

5/5

Write a Review

WEG Motor W40 – 40HP, 230/460V – 3Ph, 60 Hz, 1775RPM, ODP, Foot-mounted, Model 04018OT3E324T-W40

Free Shipping
SKU 5160825 Categories , , Tags , ,

Additional information

Brand

WEG
AC Voltage

230 volts, 460 volts
Horsepower

40
Phase

Three Phase
Material

Cast Iron
RPM

1800
Explosion Proof

No

$2,399.99

The W40 motor is a general purpose line designed for environments where dirt and moisture are minimal. The W40 cast iron frame is designed to provide maximum ventilation and heat dissipation, offering low vibration levels, high mechanical stiffness and durability.

Product Features

Standard NEMA MG-1
Frequency 60 Hz
Voltage 230/460V
Number of poles 4
Degree of Protection IP23
Synchronous speed 1800 rpm
Output rating 40 HP
Flange Without
Mounting F-1
Terminal box Left position
Enclosure IC01 – ODP

  *If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply

Add to Cart

Description

Technical Data

V-Ring Seal

V-Ring Seal to avoid the liquids and dust inlet in the motor.

Capacitor

With runner capacitor, runner and permanent capacitor or permanent capacitor.

Cooling System

• The cooling system (fan, non-drive end shield and fan cover) is designed to minimize noise level and improve thermal efficiency.
• Steel plate fan cover provides high mechanical strength, corrosion resistance and extended lifetime.

Cast Iron Frame

• FC-200 (EN GJL 200) cast iron frames meeting impact level IK08 (5J) ensuring superior mechanical strength for the most demanding applications.
• Solid motor feet providing excellent rigidity, allowing easier alignment and installation.

Centrifugal Switch

The starting system of W40 three phase motors was completely redesigned to improve functionality, thus increasing system reliability and lifespan.

Technical Data

Brand WEG
Frame 324T
Output 40 HP
Number of Poles 4
Frequency 60 Hz
Rated Speed 1775 rpm
Slip (%) 1.39
Rated Voltage (V) 230/460
Rated Current (A) 95.2/47.6
L. R. Amperes (A) 590/295
LRC 6.2x (Code G)
No load Current (A) 37.0/18.5
Rated Torque (ft.lb) 118
Locked Rotor Torque (%) 200
Breakdown Torque (%) 240
Locked Rotor Time 23s (cold) 13s (hot)
Moment of Inertia (J) 5.69 sq.ft.lb
Insulation Class F
Service Factor 1.25
Temperature Rise 80 K
Duty Cycle Cont. (S1)
Starting Method Direct On Line
Ambient Temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP23
Enclosure IC01 – ODP
Mounting F-1
Rotation Both (CW and CCW)
Noise Level 66.0 dB(A)
Approx. Weight (lb) 449

Efficiency

25% 50% 75% 100%
93.5 93.6 94.1 94.1

Power Factor

25% 50% 75% 100%
0.44 0.7 0.8 0.84

Features

Frame Material Cast Iron
Impregnation Method Dip and Bake Polyester
Main terminal box hole NPT 2″
Terminal Block Without
Shaft Locking Device Without
Drain Rubber, automatic
Shaft Material SAE 1040/45 Carbon Steel
Painting RAL 5009 203A (ISO 12944 – C3)
Grounding Lugs Single
Fan Cover Material Without
Tropicalized Painting Without
Bearing Cap Yes
Drip Cover Without
Overload Protector (phenolic) Without
Screw Cap Carbon Steel SAE 1010/20

Dimensions

Additional information

Brand

WEG
AC Voltage

230 volts, 460 volts
Horsepower

40
Phase

Three Phase
Material

Cast Iron
RPM

1800
Explosion Proof

No
Facebook Envelope Whatsapp
X
PUMPDEPOT.US