• American Company
  • American Company
  • CALL US
  • +1 (786) 613-5872

WEG SOFT STARTER – 5HP – 220-460VAC – SSW05 WEG – SSW050010T2246EPZ

5/5

WEG SOFT STARTER – 5HP – 220-460VAC – SSW05 WEG – SSW050010T2246EPZ

SKU 5172501 Categories , ,

Additional information

Brand

WEG

Phase

Three Phase

$329.99

WEG soft starters are fitted with micro processors. They are high-tech and were designed to ensure the highest performance during starts and stops of induction motors.

Soft-Starters are electronic starters designed to accelerate, deccelerate and protect three-phase induction motors, controlling the voltage applied on the motor.

The SSW05 Plus Micro Soft-Starters, with DSP control (Digital Signal Processor) have been designed to supply an excellent performance during starting and stopping electric motors with excellent cost/benefit ratio.

The Operator Interface allows easy parameter setting, simplyfying the start-up and operation activities.

The SSW05 Plus Micro Soft-Starters are compact, optimizating the space in electrical panels and incorporates all protections for the driven motor.

Product Features

Specifications
Rated Current 10A
Power Supply 220 – 460 V
Enclosure IPoo
Frame 1

colors.png Catalog

 

  *If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply

Add to Cart

Description

  Specifications Value
Starting duty cycle AC-53b 3-10:890
Starting regime (with ventilation kit) No
Standard (3 leads) Yes
Inside delta (6 leads) No
SoftPLC (ladder programming) No
Voltage ramp Yes
Voltage ramp and current limit No
Current limit No
Current limitation ramp No
Pump control No
Torque control No
Direct on line start No
Product certification UL, CE, CS, IRAM and C-TICK
Parameterization via trimpots and dip switches Yes
Parameterization via keypad Available with optional
Parameterization via software Superdrive G1
Modbus-RTU RS-232 Yes
Modbus-RTU RS-485 No
Modbus-RTU USB No

Convenience in Motor Start and Protection

SSW05 soft-starters are static starters designed for motor acceleration, deceleration and protection. The control of the voltage applied to the motor, by adjusting the firing angle of the thyristors, provides smooth starts and stops. By properly setting the variables, the obtained torque is adjusted to the load requirement, ensuring the minimum necessary starting current.

The SSW05, featuring DSP control (Digital Signal Processor),  is designed for optimal performance in motor start and stop, with excellent cost effectiveness. They incorporate all the protections for you electric motor, in addition to being easily set, simplifying the start-up activities and daily operations. Their compact dimensions contribute to the optimization of spaces in electrical panels.

Applications

The SSW05 soft-starter is especially recommended for applications in:

  • Rotary vane vacuum pump
  • Centrifugal pumps
  • Calenders (starts with no load)
  • Screw compressors (start in relief)
  • Mixers
  • Cellulose refiners
  • Axial fans (low inertia – light load)

Main Characteristics

  • Currents: 3 to 85 A
  • Voltage: 220 to 575 V
  • Control with DSP
  • Remote HMI (optional)
  • Built-in motor protections
  • Built-in RS-485 serial communication

Benefits

  • Built-in bypass
  • Control with digital processor (DSP)
  • High efficiency
  • Compact
  • It extends the lifespan of the motor and mechanical devices of the driven machine by eliminating mechanical shocks
  • Easy to operate, adjust and service
  • Simple electrical installation
  • Operation in environments up to 55 °C
  • Great reduction of the stresses on the couplings and driving devices (gear boxes, pulleys, gears, belts, etc.) during the start

Remote Operating Interface

It is an operating interface for installation on panel door or machine console. This interface also incorporates the copy function, which allows you to copy the parameter setting from one SSW05 to another in a quick and reliable way, saving programming time in machine manufacturing applications.

Free SuperDrive Programming Software

Programming software via personal computer in Windows® environment for parameter setting, command and monitoring of the SSW05 Plus. It allows you to edit parameters on-line, and parameter files stored on the microcomputer off-line. It is possible to store parameter files of all the SSW05 Plus units present in the application. The SuperDrive also includes functions to transfer the parameter set from the personal computer to the SSW05 Plus and vice versa. The communication between the soft-starter and personal computer is done via RS232 serial interface.

Additional information

Brand

WEG

Phase

Three Phase

PUMPDEPOT.US