• American Company
  • American Company
  • CALL US
  • +1 (786) 613-5872

WEG, Soft Starter SSW06 – 150HP, 220-575V, 3PH – Model SSW060205T2257ESZ

5/5

WEG, Soft Starter SSW06 – 150HP, 220-575V, 3PH – Model SSW060205T2257ESZ

SKU 5172620 Categories , ,

Additional information

Brand

WEG

Phase

Three Phase

Original price was: $4,324.86.Current price is: $3,351.99.

The SSW06 is WEG’s third generation Soft Starter line. The keypad, with dual display, has red LED digits which provide visibility and make programming easier. Integral bypass contacts eliminate heat dissipation once the motor is at full voltage, which makes it extremely compact and allows for simple integration into non ventilated enclosures and replacement of electro-mechanical starters in Motor Control Centers.

Applications

  • Chemicals and Petrochemical
  • Cement and Mining
  • Steel and Metallurgy
  • Pulp and Paper
  • Food and Beverage
  • Sugar and Ethanol
  • Plastic and Rubber
  • Textile
  • Glass
  • Water and Wastewater
  • Ceramic
  • Material Handling

Specifications

Brand WEG
Model SSW060205T2257ESZ
Rated current 205A
Power supply 220-575V
Enclosure IP00
Frame 3

 

colors.png Technical Data

colors.png Catalog

colors.png User Manual

 

Estimated Delivery Time: 3 – 5 Business days

  *If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply

Add to Cart

Description

Standard Features

  • 200-600V, 50/60Hz input power supply
  • Built-in run rated (AC1) By-pass contactor up to 820 A
  • Rated 450% current
  • Conformal coated circuit board
  • Voltage ramp or current limit start modes
  • Detachable keypad with dual display (LCD and LED) and copy function
  • 90-250Vac auxiliary control voltage
  • Single 32 bit RISC processor based control board
  • IP00 protected chassis enclosure
  • Six isolated 24Vdc programmable digital inputs
  • Three programmable relay outputs (2 AMP-250V)
  • One 0-10Vdc programmable analog output
  • One 4-20mA programmable analog output
  • Motor PTC thermistor input
  • RS-232 serial interface
  • Adjustable acceleration and deceleration ramps (1 -299 seconds)
  • Adjustable pedestal voltage (25 – 90% of line voltage)
  • Diagnostic features: Motor overload, over current and phase loss, motor immediate over and under current, SCR over temperature and fault, line phase loss and phase sequence, line over and under voltage
  • Display readings: Motor current, voltage, kW and power factor, line voltage and frequency, four last fault trips, run and power-up timers
  • Ambient: 32°F (0°C) to 131°F (55°C), 3300 ft (1000m) altitude, 90% non-condensing humidity

Additional information

Brand

WEG

Phase

Three Phase

PUMPDEPOT.US