PumpDepot-logo
  • American Company
  • info@pumpdepot.us
  • American Company
  • info@pumpdepot.us
  • CALL US
  • +1 (786) 613-5872
  • EMAIL US
  • info@pumpdepot.com

ZOELLER Grinder Pump 2 HP, 46gpm @ 5 Ft. of Head,200-230V, 1Phase, Model EI820

5/5

ZOELLER Grinder Pump 2 HP, 46gpm @ 5 Ft. of Head,200-230V, 1Phase, Model EI820

SKU 503872360 Categories , , ,

Additional information

Weight 88 lbs
Dimensions 14.75 × 11.75 × 21.25 in
AC Voltage

208-220 volts, 230 volts

Category AC Pumps

Sewage Pumps

Horsepower

2

Phase

Single Phase

Unit Price

$2,150.99

The Shark Series® 2 HP Model EI820 nonautomatic Grinder Pump is designed to remove raw sewage in sewage lift stations or in low pressure sewer applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 3-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.

Model: 820-0004 | UPC: 053514068141
  • 200-230 V nonautomatic grinder pump for use in sewage ejector applications
  • 2 HP, oil-filled motor and cast iron motor housing for optimal heat dissipation
  • 100% Factory Tested

  *If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply

Add to Cart

Description

Technical Data
Product Details

The Shark Series® Model EI820 Sewage Grinder Pump is designed to pump raw sewage in a sewage application.  Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology.  This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″. The 200-230 Volt, 2 HP, Model 820 utilizes a vortex impeller.

The EI820 should use a control panel and control switches allowing it to turn the pump on when called upon.  The Model 820 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications.  The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.

Features and Benefits
  • Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating
  • Nonautomatic pump (Piggyback variable level float switch available separately)
  • Proven Tri-Slice® cutter technology: Three independent cutting channels provide over 250,000 cuts per minute
  • Powder-coated epoxy finish provides corrosion-resistance and extends the life of the pump in harsh environments
  • Stainless steel screws, handle and hardware to prevent rust and corrosion over the life of the pump
  • 100% Factory Tested – every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it
  • Comes with a 3-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product

Product Curve

Product Dimensions

 

Product Specifications

Type: NonAutomatic

Weight: 88 lbs

Dimensions: Height 21 1/4 in   x   Width 11 3/4 in   x   Length 14 3/4 in.

Horsepower: 2 HP

Voltage: 200-230 V

Phase: 1 Ph

Amps: 14.5

Hertz: 60 Hz

RPM: 3450

Discharge: 1 1/4″ NPT

Solids Handling: Slurry

On/Off Points: Variable level float switch, customer sets

Impeller Material: Engineered Plastic

Impeller Type: Vortex

Cord Length: 20′

Certificate: CSA – UL

Product Material