American Company
| Brand | WEG |
|---|---|
| AC Voltage | 230 volts, 460 volts |
| Horsepower | 1 |
| Phase | Three Phase |
| Material | Rolled Steel |
| RPM | 1800 |
| Explosion Proof | No |
$302.99
The Rolled Steel motors line were developed for applications that demand performance, robustness and low weight integrated into a single product. The electrical and mechanical concept of the line make the motor present an optimum cost-benefit, providing reliability and energy savings.
| Standard | NEMA MG-1 |
|---|---|
| Frequency | 60 Hz |
| Voltage | 230/460 |
| Number of poles | 4 |
| Synchronous speed | 1800 rpm |
| Output rating | 1 HP |
| Flange | Without |
| Mounting | F-1 |
| Terminal box | Left position |
| Enclosure | IC01 – ODP |
*If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply
Technical Data| Brand | WEG |
|---|---|
| Frame | 143/5T |
| Output | 1 HP |
| Number of Poles | 4 |
| Frequency | 60 Hz |
| Rated Speed | 1760 rpm |
| Slip (%) | 2.22 |
| Rated Voltage (V) | 230/460 |
| Rated Current (A) | 3.02/1.51 |
| L. R. Amperes (A) | 24.2/12.1 |
| LRC | 8.0x (Code L) |
| No load Current (A) | 1.92/0.958 |
| Rated Torque (ft.lb) | 2.98 |
| Locked Rotor Torque (%) | 290 |
| Breakdown Torque (%) | 360 |
| Locked Rotor Time | 39s (cold) 22s (hot) |
| Moment of Inertia (J) | 0.1101 sq.ft.lb |
| Insulation Class | F |
| Service Factor | 1.15 |
| Temperature Rise | 80 K |
| Duty Cycle | Cont. (S1) |
| Starting Method | Direct On Line |
| Ambient Temperature | -20°C to +40°C |
| Altitude | 1000 m.a.s.l. |
| Enclosure | IC01 – ODP |
| Mounting | F-1 |
| Rotation | Both (CW and CCW) |
| Noise Level | 52.0 dB(A) |
| Approx. Weight (lb) | 34.9 |
| 25% | 50% | 75% | 100% |
|---|---|---|---|
| 0.0 | 81.5 | 84.0 | 85.5 |
| 25% | 50% | 75% | 100% |
|---|---|---|---|
| 0.0 | 0.51 | 0.65 | 0.73 |
| Frame Material | Rolled Steel |
|---|---|
| Impregnation Method | Dip and Bake Polyester |
| Main Terminal Box Hole | 1.118″ |
| Terminal Block | Without |
| Shaft Material | SAE 1040/45 Carbon Steel |
| Painting | Munsell N 1 – Matte 207N (ISO 12944 – C2) |
| Grounding Lugs | Single |
| Fan Cover Material | Without |
| Tropicalized Painting | Without |
| Bearing Cap | No |
| Drip Cover | Without |
| Overload Protector (phenolic) | Without |
Copyright © 2025 pumpdepot.us All Rights Reserved
